Heavy Duty Scale and Rust Remover
A heavy-duty product for dissolving scale and rust from pipes, equipment, urinal gutters and floors where calcium and magnesium deposits have formed. POWER DELIMER also removes mortar and cement left on concrete and ceramic floors after construction work. Dirty and stained mosaic and concrete floors can also be cleaned effectively.
• Effective and fast reaction.
• Can be used on most metal and stone surfaces, except aluminium, magnesium, marble, terrazzo etc.
Directions for Use
Dilute POWER DELIMER with cold water only, add product to water and not vice-versa
– Heavy scale – dilute 1:3
– Normal scale – dilute 1:8
– Light scale – dilute 1:15
Apply product to surface by mop, brush or acid-resistant sprayer. Allow chemical reaction to take place for about 1 minute. Scrub or agitate well, then rinse thoroughly with water.
NOTE: Use POWER DELIMER for one time use on severe build-up, and not as a regular cleaning solution. It will etch marble, terrazzo and other types of smooth or polished surfaces. If unsure about suitability of POWER DELIMER, test on inconspicuous area to ascertain if surface is adversely affected.
This product is highly acidic. Avoid ingestion, inhalation, skin and eye contact. Do not use bare hands to handle this product. Wear rubber gloves and protective clothing when handling. Allow for adequate ventilation when in use. If ingested, consume large amounts of cold water to dilute. If product contacts skin or eyes, flush thoroughly with cold water and seek medical help as soon as possible. Store in a cool place and keep container sealed.